Once you have added your VPSs to a Private Network, you will first have to set up internal IP addresses before you can make full use of them.
In the examples, the 192.168.0.0/16 range is used. However, you can choose one of the IP ranges defined in the RFC for use within private networks: 10.0.0.0/8, 172.16.0.0/12 and 192.168.0.0/16.
This article covers various Windows OS's. For Linux, please see this article.
- If the internally configured IP cannot be seen by other VPS's on your private network, add a rule on these VPS's in the Windows Firewall with Advanced Features, adding the internal IP as Remote IP address under 'Scope'.
- In case of incorrect adjustments, you can make your VPS unreachable. Make sure you also have access via the console in the control panel (if you do this via RDS). In addition, it is strongly recommended to create a Snapshot in advance which you can fall back on.
Windows Server 2016
Step 1
Log in on your Window Server VPS as an Administrator.
Step 2
Click on start, followed by the settings icon to go to the control panel.
Step 3
Click 'Network & Internet'.
Step 4
Click 'Change adapter options'.
Step 5
Richt click your network adapter called and click 'properties'.
Step 6
Click 'Internet Protocol Version 4 (TCP / IPv4)' and then 'Properties'.
Step 7
Under 'Use the following IP address', enter your internal IP and fill in the subnet mask. Click 'Ok' to save it.
Windows Server 2019 / 2022
Step 1
Log in on your Window Server VPS as an Administrator.
Step 2
Click on start, followed by the settings icon to go to the control panel.
Step 3
Click 'Network & Internet'.
Step 4
Click 'Change adapter options'.
Step 5
Richt click your network adapter called and click 'properties'.
Step 6
Click 'Internet Protocol Version 4 (TCP / IPv4)' and then 'Properties'.
Step 7
Under 'Use the following IP address', enter your internal IP and fill in the subnet mask. Click 'Ok' to save it.
Should you have any questions left regarding this article, do not hesitate to contact our support department. You can reach us via the ‘Contact Us’ button at the bottom of this page.